Does anyone know of a better way to remove the burrs after you cut this tube ?
I've been running a knife around the inside of the tube to get rid of the burrs, but
I'm sure there must be a better way ?
De-burring 3/32" brass tube
De-burring 3/32" brass tube
http://www.scraptopower.co.uk My web site, Stirling engines and AE stuff.
Re: De-burring 3/32" brass tube
Hi
Have you tried with a drill,a bit oversize? 2.5-3mm.
Finish with a 3/32" drill.
Works for me!
Jan
Have you tried with a drill,a bit oversize? 2.5-3mm.
Finish with a 3/32" drill.
Works for me!
Jan