Microwave kiln: Aluminum casting

Discussion on Stirling or "hot air" engines (all types)
Post Reply
pyroevil
Posts: 8
Joined: Tue Oct 29, 2013 12:25 pm

Microwave kiln: Aluminum casting

Post by pyroevil »

Hi all !

This last day I check how I can melt aluminum for casting some part toi build a stirling engine. I found this three interesting video :

Some people melting aluminum in microwave oven with it's own method ( not explained):
[BBvideo 425,350]http://www.youtube.com/watch?v=aUW4kg_VaZA[/BBvideo]
[BBvideo 425,350]http://www.youtube.com/watch?v=1jzKoIuFa0g[/BBvideo]

how to build one like commercial microwave kiln:
[BBvideo 425,350]http://www.youtube.com/watch?v=ZJvCuGmRWL8[/BBvideo]

The last one is probably inspired from commercial glass microwave kiln ( with graphite coating ) :
[BBvideo 425,350]http://www.youtube.com/watch?v=mQ6UDQvaRzs[/BBvideo]

For me it's sound insteresting
fullofhotair
Posts: 265
Joined: Sun Aug 05, 2012 6:28 am

Re: Microwave kiln: Aluminum casting

Post by fullofhotair »

Pyroevil
That was truly an amazing post. I went through several emotions. First off I always wanted a small kiln, but just didn't want to dole out the money .I saw your post ,my first though was fantastic microwave kiln. Then I saw the guy with the fancy expensive microwave, I was let down. Then the guy with the instructable on doing it yourself. I was again excited.

Thanks a lot Pyroevil !
Administrator
Owner
Owner
Posts: 95
Joined: Mon Jan 30, 2006 9:04 pm

Re: Microwave kiln: Aluminum casting

Post by Administrator »

Just be very careful if you try this at home! :wink:

Safety is always of top importance. Safety equipment is necessary. Knowledge of what you are doing is vital.

Pouring of hot metals is very dangerous and potentially very explosive, especially around moisture of any kind.

Heating metal up is the easy part (for the most part).

Study everything you can get your hands on before even thinking of trying this. Then think about it again before doing it........

Stay safe.

Darryl
pyroevil
Posts: 8
Joined: Tue Oct 29, 2013 12:25 pm

Re: Microwave kiln: Aluminum casting

Post by pyroevil »

Yes , a lot of safety most be take!
Hot liquid metal in the face ( or any place on the body ) can't be cool.
Post Reply