What a difference a flue makes! +75%
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
What a difference a flue makes! +75%
What a difference a flue makes! This YouTube video shows the power from no flue, to a square one, to a smooth flowing flue. The power went from .37 watts to .44 watts to the highest .65 watts, a 75% increase in power.
http://youtu.be/-8G4GgryJZQ
The engine is an alpha with Ross linkage. Appears to be of high precision.
Thoughts on its construction?
https://youtu.be/mUzz2pPw2Pg
http://youtu.be/-8G4GgryJZQ
The engine is an alpha with Ross linkage. Appears to be of high precision.
Thoughts on its construction?
https://youtu.be/mUzz2pPw2Pg
- Attachments
-
- image.jpg (26.92 KiB) Viewed 15512 times
CBStirling2
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
Re: What a difference a regenerator makes! +100%
The second video shows the difference a regenerator makes. Doubled the power.
In this, one can see the grooves inside the hot cylinder. Notice there is insulation at the top of the cold cylinder to insulate the regenerator.
http://global.rakuten.com/en/store/over ... -se-905hp/
One guy said this is a gamma engine, but from I've been reading, I'd say its clearly an alpha...
In this, one can see the grooves inside the hot cylinder. Notice there is insulation at the top of the cold cylinder to insulate the regenerator.
http://global.rakuten.com/en/store/over ... -se-905hp/
One guy said this is a gamma engine, but from I've been reading, I'd say its clearly an alpha...
CBStirling2
Re: What a difference a flue makes! +75%
Does it have two fitted pistons, one hot, the other cold, the hot one should have a cap on it similar sort of construction to a hollow displacer.
From the pictures at the beginning of the first vid I'd say you are right it's an ALPHA motor.
Ian S C
From the pictures at the beginning of the first vid I'd say you are right it's an ALPHA motor.
Ian S C
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
Re: What a difference a flue makes! +75%
Just got an email from the other guy. He corrected himself. It's an alpha.
CBStirling2
-
- Posts: 308
- Joined: Tue Feb 08, 2011 2:29 pm
- Location: Brokeville, NY. USA
Re: What a difference a flue makes! +75%
Yes. The flue increases the velocity of the hot air which increase the Reynolds number which increase the effective thermal transfer capability per unit area.
Re: What a difference a flue makes! +75%
It also helps that the flame is putting most of it's heat around the hot cap.
Ian S C
Ian S C
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
Re: What a difference a flue makes! +75%
Aviator and Ian,
So the flue improves the combustion and heat transfer. I wonder how much was the power improved due to increased fuel consumption and how much due to increased heat transfer?
Aviator, many thanks for introducing:
https://en.wikipedia.org/wiki/Reynolds_ ... Derivation
So the flue improves the combustion and heat transfer. I wonder how much was the power improved due to increased fuel consumption and how much due to increased heat transfer?
Aviator, many thanks for introducing:
https://en.wikipedia.org/wiki/Reynolds_ ... Derivation
CBStirling2
Re: What a difference a flue makes! +75%
It's good if you can line the furnace with something that will reflect the heat inward toward the hotcap, you used to be able to use a sheet of asbestos, but that's a no no these days.
Ian S C
Ian S C
-
- Posts: 308
- Joined: Tue Feb 08, 2011 2:29 pm
- Location: Brokeville, NY. USA
Re: What a difference a flue makes! +75%
Don't know if you can do this. Use an up-side-down flame. Steam car engines use that scheme.
-
- Posts: 10
- Joined: Wed Feb 08, 2017 12:33 pm
Re: What a difference a flue makes! +75%
Ian, have you ever checked this out? ITC-100 it is for use in foundry work.
I first read about it after seeing a foundry made from a plastic 5 gallon bucket lined with Kaowool and then coated with
ITC-100 and then ITC-296A. Now they even have a primer for metal.
http://secure.anvilfire.com/itc-ceramic-coatings.html
---
Pete
I first read about it after seeing a foundry made from a plastic 5 gallon bucket lined with Kaowool and then coated with
ITC-100 and then ITC-296A. Now they even have a primer for metal.
http://secure.anvilfire.com/itc-ceramic-coatings.html
---
Pete
Re: What a difference a flue makes! +75%
Pete, no I have not, must do some work on furnace design.
I tend to build quite a few vertical motors with the gas burner in the form of a ring around the top of the hot cap. Ian S C
I tend to build quite a few vertical motors with the gas burner in the form of a ring around the top of the hot cap. Ian S C
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
Re: What a difference a flue makes! +75%
A guy is selling these things on eBay. It was a long wait to convince my wife. But I finally got the Japanese Ross linkage engine. I'm very impressed with the power. It produces enough electricity to run a 6 volt motor with 100 milliamps on 90 pct alcohol.
Probably the most powerful of my stirling engine so far.
One thing that I did notice is that it vibrates a lot. Do Ross linkage engines require a lot of balancing?
Probably the most powerful of my stirling engine so far.
One thing that I did notice is that it vibrates a lot. Do Ross linkage engines require a lot of balancing?
CBStirling2
Re: What a difference a flue makes! +75%
My Ross Yoke motor is not too bad as far as vibration goes, but Andy Ross devised a balance system for his motors which consisted of a counter rotating shaft, there is a bit about it in his book "Making Stirling Engines" (free down load on the internet).
Ian S C
[img] [/img]
Ian S C
[img] [/img]
-
- Posts: 156
- Joined: Sat Dec 17, 2016 9:35 pm
Re: What a difference a flue makes! +75%
Ian, from your alpha how many watts of electrical power are you able to generate?
What's the bore and stroke?
And it looks like you built it to be pressurized. How much does that increase the power by which pressure?
What's the bore and stroke?
And it looks like you built it to be pressurized. How much does that increase the power by which pressure?
CBStirling2